News

A custom display project does not go directly from an RFQ to production. The manufacturer first needs to determine whether an existing solution can meet the requirements, whether customization is necessary, and whether the resulting design can be validated and manufactured consistently.

Multi-touch can be implemented using different touchscreen technologies. This article focuses on projected capacitive touchscreens (PCAP) and explains what determines their touch-point capability, including sensor design, Touch IC, firmware, cover glass, and operating conditions.

Electromagnetic interference (EMI) can cause false touches, missed touches, and unstable touch performance in projected capacitive (PCAP) touchscreens. This article explains how EMI enters a touchscreen system, where common interference comes from, and what engineers should consider when designing and integrating touch displays for electrically noisy environments.

Water can affect a capacitive touchscreen because it changes the electrical environment that the touch sensor is designed to measure. The resulting behavior can range from minor instability to false touches or missed inputs, depending on the amount and distribution of water and the design of the complete touch system.

A capacitive touchscreen may work normally with a bare finger but become less responsive when the user wears gloves. The problem can appear as missed touches, delayed response, or inconsistent operation.This is common in applications where gloves are part of the normal workflow, particularly medical

Cover glass thickness is an important consideration in industrial touchscreen design, but it is only one part of the final touch solution.
A thicker cover may be necessary for mechanical or environmental requirements. The challenge is to design the touch system around that requirement rather than treating glass thickness as an isolated specification.
The most reliable approach is to evaluate the cover glass, touch sensor, Touch IC, stack-up, and actual operating conditions together.

When selecting or replacing an LCD, engineers often compare screen size, resolution, interface, and connector type first.
But one detail can determine whether the display can actually work with the existing system: The LCD FPC pinout.
Two displays can have the same screen size, resolution, interface, and even the same 40-pin connector, while using different pin assignments.

Why can an LCD display look normal to the naked eye but become dark through polarized sunglasses? This guide explains how LCD polarizers interact with polarized lenses, why display orientation matters, and how to evaluate polarization compatibility for outdoor and industrial displays.

An In-Cell display integrates touch-sensing functionality into the display cell instead of using a separate touch-sensing panel. This changes the architecture of the display module and allows display and touch functions to be integrated more closely. But In-Cell should not be treated as a standalone performance specification. The final result depends on the interaction between the display cell, touch-sensing structure, touch controller, cover glass, optical stack, FPC, interfaces, mechanical design, and operating environment.

The FPC, or Flexible Printed Circuit, carries electrical signals between the display and the system electronics while also fitting into the mechanical space around the display. When the standard FPC does not match the required cable length, routing direction, pinout, connector, or installation space, a custom FPC may be needed.
For industrial and embedded display applications, FPC design is therefore part of the display integration process—not simply a matter of adding a flexible cable.